BMVPH - 10103, RELY-ON LATEX CAULK

  • MSDS: BMVPH
  • Manufacturer: DAP INC
  • Product Name: 10103, RELY-ON LATEX CAULK
  • National Stock Number: 8030-00N029073
Product Identification

Product ID:10103, RELY-ON LATEX CAULK
MSDS Date:08/24/1988
FSC:8030
NIIN:00N029073
MSDS Number: BMVPH

Responsible Party
DAP INC
DAYTON, OH 45401-0277
US

Emergency Phone: 800-543-3840

Info Phone: 513-253-7154

Cage: 90300

Contractor
DAP INC.
277 DAYTON, OH 45401-0277 US

Telephone: 513-253-7154/800-543-3840

Cage: 90300

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY

CAS: 64741-88-4

RTECS: PY8040500

Fraction By Weight: <3%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; 10 STEL

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN.
Explanation of Carcinogenicity:CAS NO.64741-88-4 IS LISTED BY THE RTECS
AS AN IARC GROUP 1 CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN

First Aid

First Aid:EYE: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. CONTACT MD. SKIN: WASH WITH SOAP AND WATER. INHAL: REMOVE
TO FRESH AIR. CONTACT MD IMMEDIATELY. INGEST: DO NOT INDUCE
VOMITING. CONTACT MD OR REGIONAL POISON CONTROL CENTER
IMMEDIATELY.

Fire Fighting

Flash Point Method:CC
Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:]
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:USE WATER SPRAY TO COOL EXPOSED SURFACES.

Accidental Release

Spill Release Procedures:USE ABSORBENT MATERIAL OR SCRAPE UP DRIED
MATERIAL AND PLACE INTO CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE AWAY FROM CAUSTICS AND
OXIDIZERS. KEEP CONTAINERS AWAY FROM EXCESSIVE HEAT AND FREEZING.
KEEP CNTNRS TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:NONE REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:PROVIDE SUFFICIENT MECHANICAL VENTILATION (LOCAL OR GENERAL
EXHAUST) TO MAINTAIN EXPOSURE BELOW PEL & TLV. (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
VENT: VAPORS ARE HEAVIER THAN AIR AND WILL COLLECT IN LOW AREAS. CHECK
ALL LOW AREAS (BASEMENTS, SUMPS, ETC.) FOR VAPOR BEFORE ENTERING.

Chemical Properties

HCC:N1
Vapor Density:>1
Spec Gravity:1.6 (H2O=1)
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE WITH A MILD ODOR.
Percent Volatiles by Volume:<25

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND CAUSTICS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:NORAML COMBUSTION PRODUCTS, I.E. COX,
NOX.

Disposal

Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS. DISCARDED MATERIAL SHOULD BE INCINERATED AT A
PERMITTED FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.